First bridge over the Mississippi River that connected Anoka and Champlin, MN. The original bridge was constructed in 1884 and stood until 1929 when the current Anoka-Champlin bridge was completed.
Letter dated January 14, 1887 from Stillwater City Engineer Lewis W. Clarke to Senator Dwight M. Sabin regarding repairs to the Stillwater bridge and suggested changes for the bridge.
Letter dated January 17, 1887 and envelope from Senator Dwight M. Sabin to Stillwater City Engineer Lewis W. Clarke assuring full support of the bridge project.
Letter dated January 28, 1887 from Major of Engineers Charles J. Allen to General James C. Duane suggesting shortening the draw of pontoon bridge from 330 to 200 feet.
Letter dated February 5, 1887 from Brig. General, Chief of Army Engineers James C. Duane to Senator Dwight M. Sabin indicating that the War Department has no authority over shortening the pontoon draws, as the bridge was built under the authority of the Minnesota Legislature.
Fifty-second Congress First Session Executive Document Number 80 United States Senate
Date Created:
1892-04-18
Description:
Thirty-one page government document, beginning with a letter form the Secretary of War, in response to Senate resolution of April 12, 1892, relative to the proceedings of the board of officers convened to consider the construction of a bridge in Duluth. This document is discussing placing a bridge over the Duluth ship canal where a bridge has never existed. The document uses the language "Aerial Lift Bridge" which must have been a design under consideration. In fact, the Aerial Ferry Bridge, or Aerial Transporter Bridge was the initial bridge constructed in 1904-1905. It wasn't until 1929 that the first bridge was remodeled with a lift span.
Contributing Institution:
University of Minnesota Duluth, Kathryn A. Martin Library, Northeast Minnesota Historical Collections
The Claude Turner design for the original Aerial Bridge from 1901. Many companies and designers vied for this project. The bridge was built in 1904-1905. This drawing shows the spires and steel structural detail as well as the concrete footings and dimensions. Both towers are shown with an end view. In 1929 the suspended car transfer was eliminated and a lift span was installed.
Contributing Institution:
University of Minnesota Duluth, Kathryn A. Martin Library, Northeast Minnesota Historical Collections
Detailed drawing of the suspended car, or gondola, and the vertical structure that holds it. This is the element that moves from one side of the bridge to the other above the canal. This transfer car could hold vehicles and people. Normal speed of the car was 4 miles per hour; it made the trip in about 1 minute. This drawing includes dimensions of individual structural elements such as braces. Drawing 160, Sheet M4. Turner is identified as engineer, 816 Phoenix Building Duluth.
Contributing Institution:
University of Minnesota Duluth, Kathryn A. Martin Library, Northeast Minnesota Historical Collections
A side elevation of the car, or gondola, which carried vehicles and people across the canal. The drawing shows: decorative circular metal plate with the word Duluth and floral-like details, wooden wall with windows, open lattice feature. Plan of strut is drawn as a detail for the bridge builders. Drawing 163, Sheet M7.
Contributing Institution:
University of Minnesota Duluth, Kathryn A. Martin Library, Northeast Minnesota Historical Collections
Two detailed drawings of the car, or gondola, which carried vehicles and people across the canal. The drawing shows etched glass, punctured decorative steel plates, electric light fixtures, seats with perforated wood bottoms, maple flooring, glass paneled doors, lattice rail, copper flashing, wire supports, wire ropes, dimensions, floor beams, pine planks, and oak flooring. Drawing 162 Sheet M6.
Contributing Institution:
University of Minnesota Duluth, Kathryn A. Martin Library, Northeast Minnesota Historical Collections
Technical details and named parts of the suspended car and its supporting structure for the bridge's builders. Included on the drawing are dimensions, rivet poles, braces, center lines, bolt connections, plates, trusses, knee brace, hanger roll. Drawing 161, Sheet M5.
Contributing Institution:
University of Minnesota Duluth, Kathryn A. Martin Library, Northeast Minnesota Historical Collections
There are three drawn details: end view, part side elevation, lateral bracing in horizontal plane. The towers are the two end parts of the bridge that hold the central span and the suspended car. The towers are referred to as North and South. The South Tower is nearer to Minnesota Point, the North Tower is on the "mainland." Drawing 167, Sheet M11.
Contributing Institution:
University of Minnesota Duluth, Kathryn A. Martin Library, Northeast Minnesota Historical Collections
This is a general elevation drawing, plus end view of both towers. The suspended car transfer is in the center of the bridge drawing over the canal. Dimensions are included for the distance from the water to the bottom of the bridge span (135 feet) and the footings. The drawing shows small stone and gravel fill near and around the concrete footings at the base of each tower. The finials are shown in detail. Lake Avenue is shown from one tower to the other. Drawing H-5421A, U.S. Patent February 1903.
Contributing Institution:
University of Minnesota Duluth, Kathryn A. Martin Library, Northeast Minnesota Historical Collections
This drawing identifies wind forces and their effects on the physical structure. Notes are included on this drawing for example: "Stresses in lower sections of tension diagonals equal or smaller than top sections, but same riveting to be used in detail." The drawing includes a key for live load, dead load, impact, wind at 150 pounds per linear foot, wind stress due to traveler, equivalent to live load. The drawing shows top and bottom laterals. Total weight of the carrier and car is given as 240,000 pounds. The scale is given as 20 feet equaling one inch. Drawing H5421, Sheet 3.
Contributing Institution:
University of Minnesota Duluth, Kathryn A. Martin Library, Northeast Minnesota Historical Collections
Detailed drawing of four parts of the Aerial Bridge. The end view is a drawing of a tower; part side elevation is of half of the Aerial Bridge with the suspended car transfer. The third drawing is called Section A-A and depicts a tower without the cross structures drawn in. The last drawing is called Section B-B, which is a top down view of one of the towers resting on its footings. All of these drawings have dimensions. The part side elevation includes a very small drawing of the side of the gondola car. The end view includes the phrase "car approaches built by city." The finials are shown on three of the four drawings. Drawing H5421, Sheet 2.
Contributing Institution:
University of Minnesota Duluth, Kathryn A. Martin Library, Northeast Minnesota Historical Collections
The caption of this post card says Clear span, 400 feet; clear height, 136 feet; total height above water, 186 feet. This view shows the waterfront when it was warehouses and wharves, docks, railroad freight sheds and slips. This view is probably from Skyline boulevard which, at this time, would have been called Rogers' Boulevard. William Rogers was the first parks department commissioner. In December 1959 the Duluth City Council and Mayor E. Clifford Bork changed the name of Rogers parkway and Skyline Boulevard to Skyline Parkway.
Contributing Institution:
University of Minnesota Duluth, Kathryn A. Martin Library, Northeast Minnesota Historical Collections
Aerial bridge under construction; Wenisch and Bourgeault cut stone contractors sign; steamer exiting harbor through canal; light house on south pier near bridge
Contributing Institution:
University of Minnesota Duluth, Kathryn A. Martin Library, Northeast Minnesota Historical Collections
This post card was mailed in 1906, but the image is from an earlier year. In the 1890s commercial fishing on Lake Superior was feeding Duluth and the entire Midwest with major operators: A. Booth and Sons (whose sign is visible at the left), Lake Superior Fish Company, H. Christiansen and Sons.
Contributing Institution:
University of Minnesota Duluth, Kathryn A. Martin Library, Northeast Minnesota Historical Collections
Aerial bridge from bay; boats entering; canal; piers; Minnesota Point buildings on both sides; houses; light house on south pier; Corps of Engineers building.
Contributing Institution:
University of Minnesota Duluth, Kathryn A. Martin Library, Northeast Minnesota Historical Collections
This booklet describes the planning and building of the Duluth Aerial Ferry Bridge in 1904-1905. Many photographs and drawings illustrate the progress and describe the working of the bridge. Details on dimensions, specifications, and costs of operation are provided.
The post card caption says The Aerial Bridge, Span 393 feet 9 inches, 135 feet high from water line. Cost $100,000. This post card illustration is of a view from the waterfront. At the right is the South Breakwater Inner Light Tower. Houses on Minnesota Point are at the far right. Engineer C.A.P. Turner, of the Gillette-Herzog Manufacturing Company of Minneapolis, designed the Ferry Bridge with Suspended Car Transfer in February 1901, meeting federal specifications. Bids were opened March 25, 1901, but only one was received. The Duluth Canal Bridge Company was awarded the contract but abandoned the work. In February, 1904, the Modern Steel Structural Company of Waukesha, Wisconsin was issued a contract. Work began July 20, 1904.
Contributing Institution:
University of Minnesota Duluth, Kathryn A. Martin Library, Northeast Minnesota Historical Collections
The post card caption says The Aerial Bridge, Span 393 feet 9 inches, 135 feet high from water line. Cost $100,000. This post card illustration is of a view from the Duluth harbor with the U.S. Army Corps of Engineers Building at the left and the South Breakwater Inner Light Tower at the right. Houses on Minnesota Point are at the far right. Engineer C.A.P. Turner, of the Gillette-Herzog Manufacturing Company of Minneapolis, designed the Ferry Bridge with Suspended Car Transfer in February 1901, meeting federal specifications. Bids were opened March 25, 1901, but only one was received. The Duluth Canal Bridge Company was awarded the contract but abandoned the work. In February, 1904, the Modern Steel Structural Company of Waukesha, Wisconsin was issued a contract. Work began July 20, 1904. The aerial bridge transporter or gondola or transfer car roadway was 17 feet by 50 feet with sidewalks seven feet by 50 feet; the cabins were 30 feet long.
Contributing Institution:
University of Minnesota Duluth, Kathryn A. Martin Library, Northeast Minnesota Historical Collections
The "North West" with passengers aboard deck was built in Cleveland, Ohio in 1894 by the Globe Shipbuilding Company but operated by the Northern Steamship Company of Buffalo, New York until 1911 when she burned.
Contributing Institution:
University of Minnesota Duluth, Kathryn A. Martin Library, Northeast Minnesota Historical Collections
The Hugh C. Leighton Co., Manufacturers, Portland, ME.
Date Created:
1910?
Description:
During storms water from waves collect in the piers which are designed with drainage gaps so the water runs back into the canal. Here, there is melted snow and a small pack of snow at the base of the pier's walkway that blocks the drainage.
Contributing Institution:
University of Minnesota Duluth, Kathryn A. Martin Library, Northeast Minnesota Historical Collections
The caption says The Aerial Bridge Span 393 feet 9 inches, 135 feet high from water line, cost $100,000 Duluth, Minn. A few more details that are not on this card are that the Aerial Bridge was completed in February, 1905. The Aerial Bridge transporter or gondola or transfer car roadway was 17 feet by 50 feet with sidewalks seven feet by 50 feet and the cabins were 30 feet long. This original bridge was modified with the lift span in 1929 and first operated March 19, 1930.
Contributing Institution:
University of Minnesota Duluth, Kathryn A. Martin Library, Northeast Minnesota Historical Collections
Every student in Duluth learned about the aerial bridge from family or teachers. This table-top model in clay is typical in demonstrating how central to children and families the structure and impact of the bridge was and is to residents of Duluth.
Contributing Institution:
University of Minnesota Duluth, Kathryn A. Martin Library, Northeast Minnesota Historical Collections